Feb 17,  · 3. Make sure your computer support UEFI boot mode if the clone hard drive is GPT partitioned. 4. Make sure you have cloned the system reserved partition besides the system partition (C: drive). 5. Make sure you have set the clone hard drive as the first boot drive. 6. Check if your clone uses an MBR system partition. If this is true, you must enable CSM in . Jun 28,  · 1) Make sure you are cloning the whole system instead of cloning the C partition only. There is a high possibility that you have a system reserved partition or EFI system partition located on your system disk. When the cloned drive won’t boot Windows 10, please make sure you did clone the intact system instead of partition only. May 06,  · Step 1. Use a SATA cable instead of a USB connection cable. Step 2. Install the SSD to the computer correctly via the SATA cable. Step 3. .
 
 

Cloned SSD Won’t Boot Windows 10/8/7 | 5 Ways – EaseUS – Preparations

If the system partition is not set as an active partition, Windows 10 can’t boot from cloned SSD. You can set the system partition as an active partition with an easy-to-use partition manager in the WinPE environment. Here is how to do it:. Create a bootable disk and boot PC from it.

Run EaseUS partition manager software. On the disk map, right-click the traget partition and choose “Advanced”. Then, select “Set Active” from the drop-down menu. The software will automatically execute the operation and create an active partition for you.

After this, your computer should be able to boot up from the cloned SSD and you can make use of all cloned files on the new disk again. Incomplete clone or clone failure will cause the cloned SSD won’t boot problem. Besides, if you haven’t cloned the boot partition, the cloned hard drive will not be able to boot either. Choose the source disk or partition as well as the target disk.

Make sure the space of the target disk is larger than that of the source disk or partition. Step 3. If you have backup your data in advance, just click ” Continue.

After this, you may repeat Method 1 and Method 2 to install the cloned SSD correctly into your computer and set it as the boot drive. If you’ve tried all the above four methods, but the SSD is still not booting or the cloned SSD won’t boot with a black screen, you are now with really a tricky problem.

You can contact EaseUS’s technical support team and let them help you via 1-to-1 remote assistance as soon as possible. On this page, we collected 5 reliable methods that work to help you fix the cloned SSD won’t boot error.

To make the cloned SSD bootable again, which method is the best? Gemma is member of EaseUS team and has been committed to creating valuable content in fields about file recovery, partition management, and data backup etc for many years.

She loves to help users solve various types of computer related issues. Author Jean has been writing tech articles since she was graduated from university. She has been part of the EaseUS team for over 5 years. Her special focuses are data recovery, disk partitioning, data space optimization, data backup and Mac OS. By the way, she’s an aviation fan! Taking everything into consideration, we can say that EaseUS Todo Backup Home can offer you a little extra sense of security with a set of advanced tools.

Report abuse. Details required :. Cancel Submit. Rob B. Independent Independent Advisor. Please remember as independents we are not responsible for the development of Windows or the computer hardware and drivers.

If you will work with me I will be here to help until the issue is resolved. Please try to clone again using Macrium Reflect – Free which is what I use. The pages appear to be providing accurate, safe information.

Watch out for ads on the site that may advertise products frequently classified as a PUP Potentially Unwanted Products. Thoroughly research any product advertised on the site before you decide to download and install it. Please let us know the results and if you need further assistance. The problem has finally been fixed. At first, I was still unable to boot to windows, but I can boot to Safe Mode. I then restarted my PC and then it successfully boot to windows! Hope it would help someone in similar condition.

Was this reply helpful? Yes No. Sorry this didn’t help. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question 0.

Unable to Boot to Windows 10 after Cloning old SSD to new SSD – Microsoft Community.Win10 Boot Problem on cloned SSD drive – Microsoft Community

It is one of the most common BSoD errors. Why would such an error occur? How to solve this problem? Read on to know more about this error. I cloned the original drive to the new drive. After the cloning, I move the new drive to the mother board in the old one’s place. After a few times it goes into Automatic Repair mode but this does not help. Is there a way to debug or fix this issue? Simply put, the message means that Windows lost access to the system partition during startup.

But what are the causes of the inaccessible boot device error after clone? How to fix it? Read on to find out. Here are five different reasons for this BSOD error. Solutions are also available. The wrong boot device may cause Windows 10 inaccessible boot device error. If you have more than one hard drive on your computer, it’s a good idea to go into the BIOS and change the boot order to start from the cloned hard drive.

Both have different boot modes. Details required :. Cancel Submit. Rob B. Independent Independent Advisor. Please remember as independents we are not responsible for the development of Windows or the computer hardware and drivers. If you will work with me I will be here to help until the issue is resolved. Please try to clone again using Macrium Reflect – Free which is what I use.

The pages appear to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP Potentially Unwanted Products. Thoroughly research any product advertised on the site before you decide to download and install it. Please let us know the results and if you need further assistance. Feedback definitely helps us help all. Step 5. In the disk map area, you can preview the changes that will take effect on the target disk.

Finally, don’t forget to press Apply on the toolbar. This operation will bring a system reboot. Please save your files and close all the running programs. Then go to BIOS setup and boot your computer from the target drive. Your computer should be normally booted now. Share this useful software with more friends. Dissimilar hardware is the main reason that is responsible for cloned drive will not boot. In such case, the best choice here is to use MiniTool ShadowMaker.

Some of you might have already known that MiniTool ShadowMaker is professional Windows backup software that is most frequently used to create scheduled system backup, disk backup, and file backup. In fact, MiniTool ShadowMaker also works well when it comes to cloning system disk and makes it bootable on computers with dissimilar hardware.

However, you do have the chance to complete this task by using the day free trial edition. Run this Windows disk cloning software. When you are asked to choose a computer to manage, you just need to select This Computer to connect. Next, you need to enter the Source tab to choose the system disk and then enter the Destination tab to select the target disk. When you click OK to continue, you will be prompted that data on the target disk will be destroyed.

Click Yes to continue. The copy process begins. You will be able to see the elapsed time, remaining time as well as the progress bar. Once the disk copy completes, you will see the following long information. Simply put, now your source disk and target disk have the same signature. Windows will mark one as offline to avoid booting from the wrong disk. But since you are going to use the targeted disk to another computer, you just need to shut down PC and then remove the target disk.

Now it is time to create a bootable media to get the rest steps. Here are the tutorials that will lead you through all the steps easily. Also, follow the universal guidance above to create a bootable media of MiniTool ShadowMaker, put the target disk to the computer that has dissimilar hardware and use MiniTool ShadowMaker Bootable to boot that PC.